1 / 2
HDX Shelf Bracket for Creality Spool Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount a Creality Spool Holder on HDX Shelving without using vertical space.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 49
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Printed in Overture Silk PLA, 0.4mm nozzle, 0.24mm layers on a Creality Hi.
The bracket end stop is not totally necessary, but is attached with an M4 bolt & nut glued into the recess on the arm.
Files
| spool holder shelf arm.3mf | both parts - probably what you want to print |
| stls/ | the STLs for spool holder shelf arm.3mf |
| separates/ | separated arm & bracket base. In the photos, the arm is glued to the base (which is holding up fine). I joined them in spool holder shelf arm.3mf |
| spool holder.FCStd | CAD files (warning, slow to load in FreeCAD due to the imported HDX shelf model) |