1 / 3
Anet A8 Plus / A8 Carriage for 3DSWAYS/E3D V6 hotend — image 1
1 / 3

Anet A8 Plus / A8 Carriage for 3DSWAYS/E3D V6 hotend

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Remixed para utilizar um dual gear clone BMG e hotend da 3dsway/e3d v6.

Rating
0 / 5
Likes
0
Downloads
7
Makes
0
Views
133
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Remix of the X-carriage created by StreetShaker (thingiverse) for the Anet A8 Plus (should work with the A8 as well). It allows the use of the original belt tensioner.

 You’ll need tree longer screw for the motor/bmg— the ones provided with the BMG clone are too short. I used an M3x40mm screw and cut about 3mm off, for a final length of around 37mm.

Offsets used: X = -22, Y = -18.

Printed in PETG using a 0.4mm nozzle and 0.28mm layer height. Used 3 perimeters and 30% cubic infill.

Tags