1 / 1
Chamberlain Garagenöffner Tastatur-Garage — image 1

Chamberlain Garagenöffner Tastatur-Garage

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Wetterschutz für die Chamberlain Tastatur-Steuerung. Weather protection for the Chamberlain keypad control

Rating
0 / 5
Likes
6
Downloads
17
Makes
0
Views
87
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Noncommercial

Ich habe diese Tastatur dieser Tage austauschen müssen, weil die Tastatur wohl unter der Witterung (Regen hauptsächlich wohl) gelitten hat. Es dauerte bis zu 15 min. und entsprechende Eingabeversuche, bis es endlich klappte. Das sollte damit “Geschichte” sein. Das Teil kann ohne Support gedruckt werden und hat, bei 0,4 mm Düse, genau 5 Wandlinien (damit braucht der Drucker nicht die Lagerbelastenden “Ratterfahrten” machen…). Lediglich der Wulst, der das Wasser außen ableitet, benötigt Infill. Ich habe 5 Wandlinien, 15 % Infill und 5 Bottom und 5 Top-Layer eingestellt.  Ich habe PETG verwendet und versiegelt.

I had to replace this keyboard recently because it had suffered damage from the weather (mainly rain, I think). It took up to 15 minutes and several attempts before it finally worked. That should be history now. The part can be printed without support and, with a 0.4 mm nozzle, has exactly 5 wall lines (so the printer doesn't need to make the bearing-straining “rattling movements”...). Only the bead that drains water away from the outside requires infill. I set 5 wall lines, 15% infill, and 5 bottom and 5 top layers. I used PETG and sealed it.

Tags