Lightweight nappy (diaper) bag holder (parametric)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A holder for nappy sacks that hangs from the edge of a changing station. Link to fully parametric model in description
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 25
- Makes
- 1
- Views
- 181
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution
A lightweight (~100g) nappy bag holder that hangs from the edge of a baby changing table. Designed to hold a nappy sack with tie handles. The design minimises contact between the printed part and the bag - making it more sanitary and lengthening the print's lifetime.
The parametric onshape model allows you to change many of the parameters, including hoop radius, panel width, bag handle length and clearance - to best fit your needs.
The provided files are modelled to hang the part over a panel of width 19.8 mm. The pins are printed separately to avoid printing any supports - these are designed with an interference fit in mind, but could be glued. The pins are provided with a clearance of ~0.05mm on either side of the pin - you may need to adjust this for your printer by scaling the part in the slicer, or changing the parameter in the parametric model.