2x 3.5" HDD Holder for Case Modding
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A set of brackets which allows you to install two 3.5" HDDs anywhere you'd like.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 76
- Makes
- 0
- Views
- 323
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This bracket allows you to install two 3.5" HDDs anywhere you'd like. Intended for computer case modding.
Make SURE you print two of these, one NEEDS to be a mirror of the other. This is easy to do in your slicer software.
You'll need a 3.5mm drillbit; measure up, drill the holes and you can then screw these blocks in to your case.
You will also need M3 screws and nuts to secure it to the case.
Made in PLA, printed at a 0.2mm layer height with 20% grid infill. It is working with no issues.
If this model is useful to you, consider checking out my YouTube channel (https://www.youtube.com/@RepairWins) I cover electronics repair, electronics modding, the odd DIY project, woodworking (if you stand a mile away and squint) and much more.