1 / 2
Mario Toadstool (Mushroom) Planter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small planter in the style of a mushroom from the Mario games.
- Rating
- 0 / 5
- Likes
- 107
- Downloads
- 158
- Makes
- 0
- Views
- 754
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Public Domain
Small planter in the style of a mushroom from the Mario games.
All STLs are already in print orientation. Layer height doesn't really matter – I used 0.30mm. Infill doesn't really matter, I used 15% rectilinear. Only the “ShroomCap” needs support. Attach parts with a small amount of cyanoacrylate glue or similar.
Print List:
- 1 × ShroomStem (beige)
- 1 × ShroomCap (red) [support required]
- 1 × DotFront (white)
- 1 × DotBack (white)
- 1 × DotLeft (white)
- 1 × DotRight (white)
- 2 × Eye (black)
Filaments I used:
- Beige. Polymaker Panchroma Matte PLA – Army Beige. (I bought it so long ago it was called Polymaker PolyTerra back then).
- Red. Overture PLA – Red.
- White. Overture PLA – White.
- Black. Overture PLA – Black.
I printed mine more than 2 years ago and just got around to uploading. While it isn't really spending time outdoors it is still going strong.