Straight Smoke Pipe
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This pipe is inspired by a popular 1930s design. Made for a school project, and it turned out great. For COSTUMES ONLY.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 127
- Makes
- 0
- Views
- 420
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial
This 1930s-inspired smoking pipe was made in Onshape. It’s hollow all the way through, so you can actually breathe while biting the pipe. You can scale it up too!
Don't smoke with it. This is for costumes/cosplay only. You can print it in two different orientations:
One is angling the pipe so that the mouthpiece is at a 45-degree angle to the bed, as shown in the first slicer picture. This allows for a great surface finish but is only compatible with a Core XY printer, as bedsligers cause instability.
The second method involves angling the pipe at a 45-degree angle along the Y axis, as shown in the second slicer picture. This is great for improved bed adhesion, but you sacrifice some surface finish quality. Included are the .stl, .step, and .3mf files.
Rafts:
Doesn't Matter
Supports:
Organic (Tree), On build plate only.
Resolution:
.2
Infill:
15
Filament:
ESun PLA
Profile:
0.20mm SPEED default parameters