1 / 9
Flat Chess Board - Only 1 Filament change - No AMS, MMU, CFS needed - m600 manual multicolor — image 1
1 / 9

Flat Chess Board - Only 1 Filament change - No AMS, MMU, CFS needed - m600 manual multicolor

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The best single manual color change method - NO steps needed. Prints upside down for smooth finish.

Rating
0 / 5
Likes
3
Downloads
18
Makes
0
Views
201
Reviews
0

Updated at source:

Model information

Category
Board Games
License
Creative Commons — Attribution — Noncommercial — Share Alike

This model prints with only one material change!  The chess board is upside down on the board and the black squares are only one layer thick.  You can print it right side up also if you prefer, but you will have to wait till the end for the color change.

The quick way to get this done is to throw in a .6mm nozzle and use the included g-code files.

In order to learn how to do this kind of material change, you will have to set up your slicer so it makes code for a tool changing setup.   

1 - Under the Printers tab, General section select more than one extruder.  Do NOT select single extruder multi material.
2 - Under the Printers tab, Custom G-Code section edit the following sections:
     Tool change G-Code:   Add an M600.   Nothing else should be here.
     Color change G-Code:  Remove M600. We just need the M600 in the tool change section.
3 - Under the filament tab, change the color to black for extruder 1
      Under the filament tabe Change the color to white for extruder 2

4 - Platter Tab (or objects in orca) 
      change the underlayer to extruder 2 (white)
      change the white squares to extruder 2 (white)
      change the black squares to extruder 1 (black)
     

note: the numbers do not matter, it will simply pause at a tool change, just make sure the first color printed is black so you only get one tool change.   You will get an M600 T0 before the start of the file, you can leave it in, but it can also be taken out of the g-code manually in a text editor. 

Send it to the printer and wait for it to ask you for a manual tool change!!! 
_____________

The outside border is included on a separate plate. you can drop the board inside this part if you desire a more finished board with another color border. 

Sample 3mf files are provides for an Ender 3.   A STEP file is included of all 4 bodies in an assembly. 
There are two ready to run gcode files, one for and Ender3 and another for a Prusa MK3 using 0.6mm nozzles. 

I made this so it was easier to find for people that do not have a material changer.  Check out the FreeCAD file in the original model if you are looking for a custom size board. 

If you are willing to do 3 material changes for a total of 2 layers of black all  you need is thicker squares.   You can simply scale the white and black checkers in the Z only to .4mm.

Tags