Minisforum UM690 Bottom Fan
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Enclosure to include 92mm fan with SSD Support
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 26
- Makes
- 0
- Views
- 342
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
An extra part I made for my UM690 when I had one back in May 2025. It's an all in one solution to keep ram cool while still having room for the SSD. Will make the overall height about 31mm bigger. USB cable is supposed to connect directly into a USB slot of UM690 to make it portable (3inch cable works best).
I have no memory of the screw length needed but its probably 2.5x20mm.
TO INSTALL
Just stack the UM690 on top of the fully assembled base and screw from the bottom. Stock bottom cover of UM690 must be removed.
PARTS NEEDED
DC-DC Boost Converter (Could just run USB 5v fan if not want to use)
Female USB Type-C Breakout Board (Could just run USB 5v fan if not want to use)
Spare fan Connector (Could just cut fan cable if wanted)
Heat inserts for mounting (hole is 4x5mm so choose any heat insert or edit f3d file to your liking)