Blokus spare pieces.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
100% based on the original blokus block sizes.
- Rating
- 4.5 / 5
- Likes
- 8
- Downloads
- 98
- Makes
- 2
- Views
- 209
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution
The model was designed from scratch in Solidworks, but the dimensions of the blocks were based on the Blokus original pieces.
Dimensions: I used the Blokus board of 20x20 squares. The board measures in total 25.57cm x 25.57cm
Material: PLA
Infill: 70% infill (if you want the blocks heavier, i reccomend using 70-90% infill).
Supports: Depends what you want: if you turn on support then you'll have some work pulling out the little squares. Without support, the print collapses a slight bit but it will still work.
I would appreciate your review or your comment if you like my design :)