Well Air Vent Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Well air vent cover with holes and optional rain cover. Available in 75 and 80 mm of internal diameter.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 17
- Makes
- 0
- Views
- 102
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
Air vent cover with holes for wells. Two versions of the insert - 75 and 80 mm internal diameter, both 5 cm long.
There's also an optional lid to protect against rain, while allowing air to flow. This lid can be affixed using M3 screws, up to 12 mm long (although you can always drill a hole through the material for a longer one).
Because this cover is exposed to sunlight, I recommend printing it with ASA or similar UV stable material. Doesn't need a brim nor glue on satin sheet (tested on Prusa Core One). Layer height 0.25 mm, print time of each part ±2h.