1 / 4
Peopoly Magneto X - Raspberry Pi, ToqueCAN & Fan Electronics Bay Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Utilizes the unused space adjacent to the Magneto X electronics bay to mount a Raspberry Pi (with ToqueCAN support) and
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 10
- Makes
- 0
- Views
- 76
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Magneto X Raspberry Pi4 + ToqueCAN Mount
Upgrade mount for installing a Raspberry Pi 4 and ToqueCAN system on the Magneto X. The Raspberry Pi plate is designed for the Raspberry Pi4 & ToqueCAN to be assemble outside of the machine and then held into place once assembled with 2x screws for easy servicing.
If you need more information on the software aspect of setting this up → https://discord.com/channels/1158578009121501267/1397375108800315432
Parts List
Electronics
- Noctua NF-A9x14 PWM Fan (92x14mm) - https://www.amazon.com/dp/B009NQM7V2
- LAN Cable Extender 1.5ft - https://www.amazon.com/dp/B00QV0K2DI?th=1
- Passes through back panel hole and clamps down for easy connect/disconnect without strain on Pi's ethernet port
Fasteners
- 34x M3x20mm Hex Standoffs (Male to Female, 6mm hex)
- 6x M3x10 SHCS - Hangers to Plate
- 2x M3x12 SHCS - Cable Clamp
- 2x M3x8 SHCS - RPi Plate
- 2x M3x25 - Wire Guide to Rear Riser
- 2x M3 Nuts - Wire Guide to Rear Riser
- 4x M4x14 SHCS - Front/Back Plates (Magneto)
- 12x M3x4x5 (Voron) Heat Set Inserts (5x Front Plate, 5x Back Plate, 1x Front Riser & 1 Right Riser)
- 4x M2.5x4 Heat Set Inserts (Raspberry Pi Plate)
* Hat tip to 3DPrinter123 for the riser profiles