Gridfinity Tray for Draw Clecos (wing nut type)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Gridfinity tray for long reach, wing nut tightening draw clecos.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 43
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Spring clecos are great, but when you absolutely, positively need your structure held together tight while you drive the rivets, use draw clecos. This tray will hold 2 each draw clecos of the wing-nut tightening variety, up to 1" grip length. They should fit draw clecos for up to 3/16" holes. They may also fit the plain nut style of draw cleco, but I don't have any of those to check fit with.
Ideally these would be used in a shallow drawer to minimize waste of space. I looked into making them stackable, but the resulting stack would have been tall enough that it would have been a nearly pointless feature. Due to the height added by the wing nut, two stacked would have been too tall for many toolbox drawers.
Like my other Gridfinity models, the base is altered to accept 6x3 magnets as a press fit, with the upper surface of the magnet holes modified to make the slicer bridge across correctly for a clean result. Due to the size of this model, I have included sacrificial “mouse ears” in the CAD to give the ends more surface area to help prevent them warping off the bed. These will need to be removed after printing.
The unit pictured was printed out of Overture PLA on my bear upgraded Mk3S+, using a 0.6mm nozzle, at 0.3mm layer height.