1 / 3
Among Us Crew mate ( halves )
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It can be split into two parts, for its skeleton to show. Individual bone and visor parts for different filament colour
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 31
- Makes
- 0
- Views
- 410
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution
About 8 centimetres long, the Among Us sculpture can be split into two halves; The head with a visor and the legs with the skeleton bone. There are slots for both the bone and the visor. There is also an internal cavity in the top half, for the bone to sit in.
- Print the visor in with transparent filament ( Make sure you printed with its face not resting on the bed. The filament should be printed through the visor. If the visor it's printed across, then it will snap when joining it into the slot.)
- Print the bone in white filament
- Print the rest of the body in red, blue, green, yellow etc.
- Assemble all the bodies together