1 / 3
Cuphead Hueforge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cuphead and his pal Mugman! Perfect for a wall art/
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 19
- Makes
- 0
- Views
- 162
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.1mm
The Model is 150.08x138.07mm in size You may print at higher layer heights below the Base Thickness of 0.5mm
The Max allowed Thickness is 1.94mm and the Actual Thickness is 1.7mm. This print uses 5 unique filaments :
- #ffd900 PLA Elegoo Yellow Transmission Distance: 4.4
- #000000 PLA Elegoo Black Transmission Distance: 0.3
- #ffffff PLA Anycubic Bright White Transmission Distance: 2.4
- #40b9ff PLA Elegoo Sky Blue Transmission Distance: 0.4
- #e40101 PLA Elegoo Red Transmission Distance: 3.9
Swap Instructions:
- Start with Yellow At layer #9 (0.74mm)
- Swap to Black At layer #11 (0.9mm)
- Swap to Bright White At layer #14 (1.14mm)
- Swap to Sky Blue At layer #17 (1.38mm) swap to Red for the rest.