1 / 5
Trezor Safe 5 case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A couple of options for carrying & protecting the Trezor 5.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 35
- Makes
- 0
- Views
- 170
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A carry case for the Trezor Safe 5, with a couple options for attachment and face styles. The carrier has variants for a small carabiner or keyring mount (5.5mm hole) or a strap (up to 30mm wide). There are two face plates: one that follows the Trezor outline and another with a simple window that's a little more circumspect. You can combine either carrier with either face plate to get the setup you want.
Hardware:
- 2 x M3x8 button-head screws
Printing notes:
- 0.4mm nozzle, 0.3mm layer height
- No supports required (print the face plate face-down)
- I used PETG, but should work with anything
- The model follows the contours of the Trezor closely, so dimensional accuracy of the printer is important