Extender for iFixit Precision Bit Driver
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.23 – €0.29 net (excluding VAT)
For file: ifixit_extender_0.4n_0.2mm_PLA_MK4S_19m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.26 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 19.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Extend the reach of the iFixit bit driver for those screws in deep pockets.
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 21
- Makes
- 1
- Views
- 99
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
The reach of iFixit bit driver was not sufficient for my use. I created this extender to enable myself to reach to screws.
I printed this with the 3 perimeters and 30% cubic infill. I printed it standing with the bit end down. I printed on a MK4S. The fit is snug enough that the bit does not fall out by accident.