Wall-mounted storage for taps M3–M12 and matching drill bits
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall-mounted holder for taps M3, M4, M5, M6, M8, M10, M12 and their matching drill bits
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 36
- Makes
- 0
- Views
- 153
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution — Noncommercial
Hello,
Wall-mounted holder for taps M3, M4, M5, M6, M8, M10, M12 and their matching drill bits
Printed in PLA with 0.20 mm layer height, 0.40 mm nozzle, and automatic supports.
See photo for the recommended print orientation — it also allows for a color change to make the markings easier to read.
If needed, holes can be slightly adjusted with a drill bit, but in my case, everything fit perfectly.
Set includes:
. 1 tap holder
. 2 wall mounts
. 2 countersunk screws (Ø5 mm max)
Can be assembled with the drill-bit support using the linking piece between the drill-bit and tapping supports.
https://www.printables.com/model/1426973-drill-bit-storage-rack-o1-o-13-mm/files
Good print.