1 / 5
Paper clip bar for monitor — image 1
1 / 5

Paper clip bar for monitor

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Magnetic paper clips placed on a bar for a monitor.

Rating
0 / 5
Likes
0
Downloads
16
Makes
0
Views
118
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial

The bar is designed specifically for a 23.8" MSI monitor and is 53.8 cm long.

The clips are spaced so that 7.5 cm wide note paper fits neatly between them.

The bar is divided into three parts for easier printing, and the individual sections are joined together using connectors.

The bar is attached to the bottom of the monitor using double-sided tape.

Each clip consists of two magnetic parts connected by a hinge. The lower part of the clip is integrated into the bar, while the upper part is printed separately.

The small opening tab is also printed separately and glued in place after printing, because it is too small to print reliably with supports.

A short piece of 1.75 mm filament is used as the hinge pin.

The magnets are 6 × 1.6 mm.

The clip models can also be downloaded separately, so they can be used on a bar of any length.

Tags