1 / 4
Hadley Eyepiece Holder (for the "Hadley Telescope - Official Metric") — image 1
1 / 4

Hadley Eyepiece Holder (for the "Hadley Telescope - Official Metric")

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Wanted the the same but for my "Hadley Telescope - Official Metric"

Rating
0 / 5
Likes
1
Downloads
22
Makes
0
Views
141
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

Follow the original model for instructions.

I provide the .f3d which is just of modified version of the original.

Maturity

  • Good.
  • 4 prototypes.
  • In use since 2025/11.

Differences to the original

Fits the official metric Hadley telescope (https://www.printables.com/model/268580-hadley-telescope-official-metric-remix). Then distance between mounting screws is 16mm.

Follows the design guides of the official metric Hadley telescope:

  • Screw holes diameter: 4.7
  • Nuts place: 7.2 x 3.6

I raised the position of the screw for the screw to touch the eyepieces in its small groove. This provides a better secure.

I intentionally let some plastic (1mm) between the screw and the eyepiece for a soft contact. Letting the screw touching the eyepiece marks it. I hope it will long a bit.

I removed some hard to print fillet.

To manually tighten the securing screws, you can use the thumbwheels I provide or use the ones from the original metric telescope (Matt Extra Parts - Thumbscrew Small - M4 hex nut).

Hardware is metric

  • 4x M4x25 socket head cap screw. You need the screws to be 5mm longer than the original ones to fix to the middle assembly or bearing interface assembly.
  • 4x M4x16 hex-head screw (ISO4017) (minimum 12) to secure the eye pieces in the holder.
  • 4x M4 hex nut (ISO 4032) to secure the eye pieces in the holder.

Printing instruction

I printed this in PETG.

Log

  • 2025/11/13 Initial release.

Tags