1 / 3
Enclosure for a CrowPanel ESP32 4.2inch E-paper Display
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Enclosure for a CrowPanel ESP32 4.2inch E-paper Display to cover switches, GPIO and create a place to hide a battery.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 53
- Makes
- 0
- Views
- 298
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A CrowPanel ESP32 4.2-inch E-paper HMI display from Elecrow is used as the display. For aesthetic reasons, the switch and GPIO port should be hidden. Space was also needed to hide a battery. The screen is mounted from the inside with hot glue. The back panel is attached with 15mm M2.5 spacers.
Information on programming the display can be found at https://www.makerguides.com/crowpanel-4-2-inch-e-paper-with-gxepd2/.