Knobs + M5 to M10 nuts set
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Set of knobs and nuts. Nuts available: M5, M6, M7, M8, M9 and M10
- Rating
- 5 / 5
- Likes
- 56
- Downloads
- 499
- Makes
- 5
- Views
- 1,804
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
All buttons are compatible with all nuts. No glue is required to attach a button to a nut. Place the nut on a flat surface, position the knob on top and push the knob hard to lock it on.
Nuts are available with a fitted thread (file named xxx_offset_0) or with a 0.1mm offset (file named xxx_offset_10), to be chosen according to the precision of the printer.
The adjusted versions are difficult to screw on the first time but after two or three screwing/unscrewing it becomes easier.
If in doubt, take the version with the 0.1mm offset.
Caution: if you intend to use these nuts with printed screws, you must choose the version with the 0.1mm offset.
It is recommended to print the knobs with a layer height of 0.2mm and the nuts with a layer height of 0.07mm.
For a better durability, it is recommended to print the nuts with PC Blend filament.