Another Big Einsy Case for Bear Upgrade
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix of my Big Einsy Case for Raspberry Pi Zero W 2, with options for front entry and a RPi USB
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 50
- Makes
- 1
- Views
- 602
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
See my first remix at https://www.prusaprinters.org/prints/147328-big-einsy-case-for-raspberry-pi-zero-w-2 for the basic description. To mount to the Bear frame use (4) M5x10 button head screws. If you are not mounting a fan, just screw the fan screen onto the cover with M3x10 countersunk screws.
I mounted the power supply outside an enclosure, so I added a zip tie anchor and opening through the cover for the “Front Exit" model.
Then I saw what Mr.Baham did at https://www.prusaprinters.org/prints/15544-prusa-mini-usb-mod-v2 and incorporated that so I can connect a webcam without opening the case. This is in the “…w USB” model. Note that this works with this connector that I bought on Amazon, and may need to be adjusted for others “CableCreation Micro USB 2.0 OTG Cable Flat On The Go Adapter Micro USB Male to USB Female”
Edit- I found that the fan screen causes a high pitched whiny noise. I designed alternate “aero inlet” and “simple bezel” and recorded the RPi temps during a print. The original screen had the highest temp at 35.9 C, with the bezel at 34.3 C, no noise, and the aero at 33.8 C and a little noise. I have included these stl files as well, and I am now using the simple bezel.