Chain guard ring asymmetrical
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.83 – €2.23 net (excluding VAT)
For file: Kettenschutz_0.4n_0.2mm_PETG_COREONE_1h35m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.03 excluding VAT (range midpoint).
- Weight reported by the author
- 37 g
- Print time reported by the author
- 1.59 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
An asymmetrical chain guard ring 5 mounts
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 81
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Description
An asymmetrical chain guard ring for a Shimano front chainring with 42 teeth.
The chainring has 5 holes, but these are arranged asymmetrically.
All hole spacings are 86 mm, except for one which is 75 mm.
The bolt circle diameter is approximately 143 mm.
I assume that the asymmetry is due to the position of the crank.
The outer diameter of the guard is 185 mm. All necessary dimensions can also be found in the images.
I have also attached the Fusion3d file.
Printing
Printed in PET with supports on only on the bed. I used 10% infill.