1 / 1
Top Hat for Frog
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
TOP OF THE MORNIN'!
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 4
- Makes
- 0
- Views
- 57
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution — Noncommercial
Print everything in the provided part orientation.
Place two magnets (cylinder, 8x3mm) on top of the frog head to align them correctly:
Mark the front magnet with a permanent marker or something else to help identify the orientation:
Insert the marked magnet in the front part of the hat (small green indentations, view from below):
Put a few drops of glue into the magnet holes, between both hat halves and on the edge of both halves. Insert the top part into both halves (orientation is not critical) and press everything together until the glue has hardened.