Prusa Core One L Build Plate + Accessory Organizer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Organize your build plates & accessories on your Core One L
- Rating
- 4.2 / 5
- Likes
- 107
- Downloads
- 446
- Makes
- 12
- Views
- 2,378
- Reviews
- 15
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This build plate organizer stacks six build plates and some other small accessories like lubricant, a nozzle wrench, and the printed nextruder nozzle change tool.
Because the Core One L side panels are aluminum, you will need:
- 2x M3x8 Bolts
- 2x M3 Nuts
Please note that the one I printed didn't have the exact right angle, and it “floats” a little bit… I adjusted the angle in the CAD model, but I'm still not 100% sure about it and have no need to print and test it… so, maybe print a vase-mode PLA one to test before printing, and report back. Step file is provided in case you want to edit.
I suggest printing the final version in a higher temp material such as ABS or PETG-CF, because the outer panels will easily reach 60C, and could cause deformation of the area around the nuts/bolts. NO PLA!
Let me know how it goes :)