1 / 3
Flashforge AD5M Pro Door Handle
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Flashforge Adventurer 5M Pro Door Handle
- Rating
- 5 / 5
- Likes
- 21
- Downloads
- 116
- Makes
- 3
- Views
- 578
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
If you have the printer against the wall on the right side, the front door is very difficult to open. The handle is only glued with thin double-sided tape.
The two parts of the handle are screwed together after gluing.
- Glue the lower part to the door
- Cut a piece of filament and insert it into the hole as a guide
- Glue the upper handle
- Screw it together.
Material: PETG (or PLA)
Layer: 0.2mm
Infill: 30%
Support: None
Screw: 2x Stelf Tapping Ø 3x8mm
Adhesive tape: 0.15mm Thick 3M 9448 or 0.2mm Thick Acrylic Adhesive Double Sided Tape for phone Tablet Display