RockNRoll - Rockers for Voron V2.4 with access holes
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Rockers to roll back a Voron 2.4 for maintenance
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 101
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
This mod is intended to make access to the electronics compartment easier by enabling the printer to be rolled on its back without damaging cables or the exhaust system. The rockers are mounted on the vertical extrusions in the back replacing the panel corners. Additionally they are braced against the horizontal back extrusion. The mod is designed for and tested with a 350mm V2.4, but it might work with a V1 or Trident as well. Due to their higher center of gravity V1 and Trident might need additional feet higher up.
All credit for design goes to RockNRoll, see original page for other files needed to make the mod work and documentation/instructions.