Goblin Vanguard | 32mm & 75mm Fantasy Miniature | FDM & Resin
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Creating the Goblin race for an upcoming campaign.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 79
- Makes
- 0
- Views
- 138
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Characters & Monsters
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
⚔ Goblin Vanguard
Small humanoid (goblinoid), neutral evil
Armor Class 16 (shield, leather armor)
Hit Points 45 (6d6 + 24)
Speed 30 ft.
STR | DEX | CON | INT | WIS | CHA |
|---|---|---|---|---|---|
13 (+1) | 16 (+3) | 18 (+4) | 10 (+0) | 12 (+1) | 8 (-1) |
Saving Throws Dex +5, Con +6
Skills Athletics +3, Perception +3, Survival +3
Senses darkvision 60 ft., passive Perception 13
Languages Common, Goblin
Challenge 2 (450 XP)
Proficiency Bonus +2
🧠 Traits
Shield Bash. When the Goblin Vanguard takes the Attack action, it can use a bonus action to shove a creature within 5 feet.
Relentless Endurance (1/Day). When reduced to 0 hit points but not killed outright, the Goblin Vanguard drops to 1 hit point instead.
Scrappy Tactics. Gains advantage on attack rolls against creatures larger than itself if an ally is within 5 feet of the target.
⚔ Actions
Jagged Sword. Melee Weapon Attack: +5 to hit, reach 5 ft., one target.
Hit: 8 (1d8 + 4) slashing damage.
Shield Slam (Recharge 5–6). The Goblin Vanguard slams its shield into a creature within 5 feet. The target must succeed on a DC 13 Strength saving throw or be knocked prone and take 5 (1d6 + 2) bludgeoning damage.
Character Created in assistance with Tripo3D.
Perfect for resin or FDM printing, this model offers crisp, painter‑friendly detail and a dramatic silhouette—ideal for tabletop RPGs, fantasy dioramas, or collector displays that celebrate stealth, intrigue, and deadly elegance.
⚙ Print Specs
Supports: Standard tree auto supports
Category: Characters & Monsters
Recommended Layer Height: 0.05–0.1 mm (resin) / 0.12–0.16 mm (FDM)
Material: Resin or PLA+ for best detail retention
Scale: Heroic 1:10 (adjustable for tabletop use)
Orientation: Crouched pose with daggers supported
🧱 FDM Printing
Use Tree Supports (Default) for optimal overhang coverage.
Enable Outer Brim to ensure strong plate adhesion and prevent edge lift.
Recommended materials: PLA+ or PETG for best surface finish.
Suggested layer height: 0.12–0.16 mm for miniatures and display pieces.
Tune flow and retraction for fine detail; slower outer walls yield smoother armor and faces.
🧪 Resin Printing
Use the following settings for reliable, high‑detail results:
Printer: Elegoo Saturn 4 Ultra 16K
Exposure Settings:
Layer Height: 0.05 mm
Bottom Layers: 5
Exposure Time: 2.75 s
Bottom Exposure Time: 37 s
Transition Layers: 10 (Linear)
Rest Times: Before Release – 2 s, After Release – 2 s, After Retract – 4 s
Advanced Settings:
Anti‑Aliasing: Level 8
Print Time Compensation: Enabled (0.93 s)
Light PWM: 255
Bottom Light PWM: 255
Supports & Orientation:
Use Auto Orientation and Auto Supports (Light) in ChituBox.
Ensure proper drainage and avoid flat surfaces directly on the build plate.