Rain Collector for Gutter 100mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Rain Collector tight and narrow fit on down gutter(100mm) with access for cleaning
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 9
- Makes
- 0
- Views
- 144
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
All the rain collector I had are too wide on the outside (see 5th picture left) and bend the gutter as they hit the wall.
In the dry season dirt and leave accumulate on the roof and during the next rain every thing run down at once and block the collector to the point that the water has to escape from the top of the pipe.
I designed this collector to have a small footprint, 2mm more for the radius. I added a trap door to be able to clean the inside without the need to dismantle the assemby.
There are two vesions of the main body, one for the trap door on the left of the oulet and one to the right.
Everything (3 pieces) can be printed without support. The outlet is a tight fit and has to be inserted, one can glu it if one feels that is necessary. The trap door is a screw and could be equiped with a O ring if a little leak is a problem (while the rain is making everything wet!).