Belkin AVC006 Steam Deck Dock Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Converts the Belkin AVC006 USB-C Hub into a Steam Deck Dock. Tolerances were made for printing at 0.3mm layer height.
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 26
- Makes
- 1
- Views
- 1,052
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
Converts the Belkin AVC006 USB-C Hub into a fully enclosed Steam Deck Dock. Ran out of good new filament so I used old filament in the pictures (sorry).
Tolerances were made for printing at 0.3mm layer height.
IMPORTANT! Print the top piece as mesh, if the hubs are fully enclosed they will 100% overheat! (top layers: 0, bottom layers: 0, wall line count: 8, infill pattern: lines, infill density: 20% or less)
additional parts needed
M2 6mm screws (pan head or similar) https://www.amazon.com/dp/B00F33TFRS
USB-C 3.1 90 Degree Extension Cable https://www.amazon.com/dp/B07YZ4CSFH
USB-C 3.1 Right Angle Adapter/Extender https://www.amazon.com/dp/B08CDGHQWF
Total Part Cost ~$30