Parametric Buchner Funnel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two piece parametric buchner funnel - models @ 70mm and 90mm
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 89
- Makes
- 0
- Views
- 273
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Chemistry & Biology
- License
- Creative Commons — Attribution — Share Alike
I've mostly used this model at the 90mm size. The grid of hexagons can be adjusted as well, in terms of size and spacing.
I recommend printing in PETG. The top does not need supports. The funnel portion has a rim that does but the threads do not. I recommend only using supports there and not on the threads.
If you are concerned about the seal, you can add glue along the threads, or use a plastic welder. The threads have a pretty loose tolerance and that could be reduced as well.
I made this because I wasn't happy with the models I could find, in particular those with a separate plate.
I welcome your comments and suggestions, although no promises on updating :D
Suggested print settings: PETG, 0.20 line width, 3 walls, no brims, support on overhang for the funnel piece
If you like, increase the XY distance for the supports so that you don't need to clean up the start of threads.