campfire hueforge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
it's like caveman TV
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 4
- Makes
- 0
- Views
- 35
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Project: foyyyr.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 150.07x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.08mm
Filaments Used:
#000000 PLA+ Esun Black Transmission Distance: 0.1
#f56233 PLA Jessie Premium Mystery Orange Transmission Distance: 3.9
#d4e500 PLA Jessie Premium Neon Yellow Transmission Distance: 6.6
#ffffff PLA+ Sunlu White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Mystery Orange
At layer #11 (0.96mm) swap to Neon Yellow
At layer #19 (1.6mm) swap to White for the rest.