1 / 1
ESPHome Player for ESP32 Devkit1
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Resized the recess in the bottom for a full size esp32. Also added triangle stl for top color.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 19
- Makes
- 0
- Views
- 161
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
I had an ESP32 Devkit1 on hand (dimensions are roughly 28x52mm) that wouldn't fit the recess in the original version. So, I resized the recess, added 4 mounting holes for m2.3 self-tapping screw, and changed the usb-c to micro-usb for power. Fits with the rest of the original parts.
Also, modeled the triangle to add a pop of color to the top triangle. Printed it separately and attached it with a dot of CA glue. The 0.1mm version fit a little bit too loose, the 0.05mm version fit perfectly for me.