1 / 4
Qube 540 CaseStriker
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
CaseStriker: A punch ball for your Qube 540-smack it when your Game crashes or CAD breaks. Save the PC, vent your rage!
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 12
- Makes
- 0
- Views
- 574
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Game crash? CAD exploded? Boss emailed you “quick change”? Smack the Case Striker-a TPU punch ball that mounts to your Qube 540 and absorbs all your rage, so your computer doesn't have to.
It's therapy but for people who don't want to talk about it
Printing
TPU or Foam Based Filament (Ball)
- 2 walls
- 0.2mm layer height
- BALL: 5-10% infill (Gyroid)
- Supports should be used at the base of the Ball.
TPU (Hanger)
- 2-3 walls
- 0.2mm layer height
- 20-30% infill (Cubic or Honeycomb)
- Recommend printing the Hanger horizontally with supports. (PLA supports provide a quick release on TPU if you have the Prusa XL or a multicolor system)
Heat Withstanding Material (Base)
- 2 walls
- 0.2mm layer height
- 15-25% infill
- Recommend printing it with the snap connections facing up and using supports for the front face of the base.
- It can be printed vertically for better strength but will require need extra supports.
Connection Base
Base Connection
