Raspberry Pi Zero 2 W EDC Case with Spare Card Storage
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.93 – €1.14 net (excluding VAT)
For file: Raspberry Pi Zero 2 W EDC Case v1.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.04 excluding VAT (range midpoint).
- Weight reported by the author
- 11 g
- Print time reported by the author
- 1.13 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
First Print! I wanted a Raspberry Pi Zero 2 W case for Kiwix that would be safe in my pocket.
- Rating
- 0 / 5
- Likes
- 28
- Downloads
- 68
- Makes
- 0
- Views
- 827
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
It works for me so I decided to upload it to get it off my plate. It's a little rough but it's good enough and I'm proud of it :)
The primary purpose is running kiwix (https://www.kiwix.org/en/) for an off-grid wikipedia, project gutenberg, and medical library when camping… so only the power port is accessible.
The case is friction fit with no screws so make sure your printer is calibrated.
The vent slide has a window for the LED and storage for a spare micro sd card.
- When the power port door is closed, the vent slits and LED window are closed.
- When the power port door is opened, the vent slits and LED window are opened.
My goals were to make it small enough to fit in my pocket comfortably and to seal it well enough to keep pocket lint out of the case.