1 / 1
Small Zip Lock Bag Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed to hold ~100 ml small zip lock bags open.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 59
- Makes
- 0
- Views
- 245
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
This holds your small ~100 ml zip lock bags open.
I used PETG, 3 walls, 15 gyroid infill, 0.25 mm layer height on a 0.4 mm HF nozzle.
I don't suggest using PLA as the clips may creep and lose their springiness over time.
Depending on the tolerances of your printer, the clips may fuse to the arm. You can undo this by e.g. placing a flathead screwdriver in the fused area, and gently knocking on the handle with a hammer, and I emphasise that you do this gently so you don't hurt yourself.
Print in the orientation the parts are in the file.