1 / 8
140 mm fan PCIe card slot adapter (Generic and Phantek Enthoo 2 Pro Server Edition) — image 1
1 / 8

140 mm fan PCIe card slot adapter (Generic and Phantek Enthoo 2 Pro Server Edition)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This adapter allows mounting PCIe cards in an 140 mm fan case mounting point.

Rating
0 / 5
Likes
3
Downloads
30
Makes
0
Views
365
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial — Share Alike

This adapter allows to install PCIe cards in a 140 mm fan mounting point of your case.

This model comes in three versions:

A generic 140 mm version (shown in the first photo) that should be suitable for all cases: V1 generic 140x140 mm card slot adapter.stl

The other two versions (see rest of the photos) are designed to mount two AMD Instinct MI50 data center GPUs in the front-upper fan mounting point of the Phantek Enthoo Pro II Server Edition case in a hanging configuration. This allows up to six two-slot GPUs in this server/workstation case.

V2 top-front 140x162 mm Enthoo 2 Pro Server parallel to side panel.stl shows the configuration shown in the images, ie. the cards are oriented in parallel to the side panels.

V2 top-front 140x162 mm Enthoo 2 Pro Server sideways.stl has not been tested yet. The orientation of the cards is parallel to the front panel.

Before printing

IMPORTANT: 
The exhaust air of the AMD Instinct MI50s (and other GPUs) gets really hot (over 60°C), so make sure to print in ABS or ASA. PETG might work but is untested. DO NOT PRINT IN PLA! It will deform and meld and this will probably destroy your cards when they come crashing down - especially in a hanging configuration. YOU HAVE BEEN WARNED.

To get a strong print:

  • use at least 4 wall loops and at least 4 top and bottom shell layers
  • increase the infill to at least 30%
  • If you are printing ABS add a 10 mm brim to mitigate warping. Good luck if you don't have a closed print chamber.

Use two or four M3x10 (x3) threaded inserts for the M3 screws in the slot brackets (see photo).
You may use self-tapping fan screws to attach to the case (see photos).

You may want to reinforce the printed part with some sheet metal and use through bolts with washers if you don't want to use (or trust for that matter) self-tapping screws or if you need to print with PLA filament. Suggestion as per user “SkirtChaser” on gfx906 Discord server.

Customization

I have also included the OpenSCAD files used to render the finished STL files. You may use those to change the configuration, for example if you need 6 slots etc. Check out the variables at the start of each script.

Tags