1 / 2
Reinforced Recoil Spring
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Reinforced the spring for the recoil mechanism, so that it's one line (0.4mm) wider on the springs. Also added one loop.
- Rating
- 5 / 5
- Likes
- 28
- Downloads
- 425
- Makes
- 3
- Views
- 636
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The regular spring in the (awesome) design by @DeSteiner sometimes feels a bit too weak or too short. I've created three alternatives:
- regular thickness, but extended
- thicker spring, same length as original
- thicker spring, AND extended
The reinforced (thicker) springs are 0.4 mm thicker, usually thats one extrusion width extra. The extended versions have one extra ‘loop’ added to them.
In my experience the thicker AND extended spring add a lot of stress to the trigger, so make sure that it's strong enough.
Print in PETG or better for best results