1 / 2
Drill Chuck Key Holder Strap
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The strap that holds my drill chuck onto my drill cord finally snapped so I made a new retention strap from TPU.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 13
- Makes
- 0
- Views
- 57
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
After my drill chuck key retention strap broke, I searched for a 3d printable replacement and found nothing. Rather than get by with a piece of rope or a thick rubber band, I made this replacement strap from TPU.
The strap was designed around a ½ inch chuck key; so, you'll need to reduce X and Y in your slicer for smaller chuck keys. Do not reduce the Z as it is only 1.2mm thick. Also, consider using concentric instead of lines for surfaces for improved reliability.