1 / 2
Spacecraft IDSS Centerline Docking Target (reworked)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Slight rework of the model by @maxfagin_179712
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 34
- Makes
- 0
- Views
- 197
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Engineering
- License
- Creative Commons — Attribution
I adjusted the backplane piece of @maxfagin_179712's model to better match the specifications on the backplate polygon markings and the 5 reflecting elements.
You still need to go download the alignment-cross.3mf and connecting-rod.3mf on the original model page!
I printed this at 35% (to fit 180x180mm) on my Bambu Lab A1 mini with ironing to get a nice finish on these large horizontal areas. The file I used is attached and includes further adjustments:
- wider lines for better printability at this lower scale
- local modification of the infill direction & density as well as top surface infill pattern
- closed out the hole for the screw on the target piece (because I intended to use glue)