1 / 2
Skadis Stand – Screwless/Friction-Fit
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A screwless, friction-fit stand that stabilizes IKEA Skadis pegboards on desks or tables.
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 80
- Makes
- 0
- Views
- 265
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Freestanding stand for IKEA Skadis pegboards. Friction-fit design, no screws needed. Prints as a pair and slides on with a snug fit.
Tested on the 14×22" board. Other sizes should work, but YMMV. If you need wider feet for larger panels, let me know and I can make an updated version.
Print settings:
- PLA or PETG
- 0.2 mm layer height
- 15–20% infill
- Print as-is, no supports
Notes:
Fit may vary slightly by printer. The slot is tuned for a snug friction hold, but if it feels loose, scale the slot axis by 1–2%.