Voron 2.4r2 Removable SSD
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Removable SSD mod for Voron 2.4r2 350 printer. Printers using Raspberry pi SBCs with USB connected storage.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 12
- Makes
- 1
- Views
- 173
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This is a modification of the front right skirt on a Voron 2.4r2 350 printer. It allows for a connected SSD to be removable making it easy to make backup images of the disk before upgrades.
Needed Hardware:
If the SATA connection sticks or is too tight, add a very small amount of dielectric grease to the SSD adapter side (put a tiny amount on your finger and rub it across the connection). You can find it at any auto parts store usually by the car batteries. You can also slightly loosen the M3 screws holding down the adapter.