1 / 1
Double Hydrometer / alcometer holder for multiboard
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These use stainless washers, so the tools don't touch plastic
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 34
- Makes
- 0
- Views
- 100
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Double hydrometer or alcometer holders for multiboard. Each slot has an embedded stainless steel washer near the bottom and another stainless steel washer (glued in place).
Pause at layer 15 to add the washer
Washer size:
25mm Diameter (actually 25.5 measured with callipers)
1.5mm thick
These are stackable vertically to give more support, or they stack side by side with snug clearance.
Attach to the multiboard with bolt-locked snaps.