1 / 1
Zhukov-S Wedge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the tightening wedge for the Magpul Zhukov-S stock. You will need to print this out of material capable of…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 49
- Makes
- 0
- Views
- 426
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
This is the tightening wedge for the Magpul Zhukov-S stock. You will need to print this out of material capable of withstanding exposure to heat, lubricants, solvents, threadlocker, and the recessed nut hole must be able to withstand compression exceeding 40 inch/pounds.
STEP and IGS files are included below.
Category: Hobby
If you'd like you can buy me a coffee here: https://www.buymeacoffee.com/junrenman