New GCode for CoreOne Plus for Nozzle Wiper
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.59 – €0.72 net (excluding VAT)
For file: gcode.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.66 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 1 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Allows GCode to avoid the vent controls
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 18
- Makes
- 0
- Views
- 487
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Public Domain
This just adds some gcodes to move the extruder to the middle of the CoreOne before and after the nozzle scrubbing. I've added a few more scrubs to the code, and allowed the original nozzle cleaning method to remain. If you want to remove the original method put a ; at the start of that last line.
This is to replace the line (assuming this hasn't already been done):
G29 P9 X208 Y-2.5 W32 H4;
The part I've added is:
G0 X125 Y110 Z10 F10000;
at the beginning and end.
G0 X125 Y110 Z10 F10000;
G0 X40 Y-14 Z2.5 F10000;
G0 X76 Y-18 Z2.5 F10000;
G0 X40 Y-14 Z2.5 F10000;
G0 X76 Y-18 Z2.5 F10000;
G0 X40 Y-14 Z2.5 F10000;
G0 X76 Y-18 Z2.5 F10000;
G0 X40 Y-14 Z2.5 F10000;
G0 X76 Y-18 Z2.5 F10000;
G0 X40 Y-14 Z2.5 F10000;
G0 X76 Y-18 Z2.5 F10000;
G0 X40 Y-14 Z2.5 F10000;
G0 X76 Y-18 Z2.5 F10000;
G0 X40 Y-14 Z2.5 F10000;
G0 X125 Y110 Z10 F10000;
G29 P9 X208 Y-2.5 W32 H4; original nozzle cleaning method