Ball Canning Ring Tower - Wide Mouth
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€8.87 – €10.84 net (excluding VAT)
For file: Lid Tower Large v1_0.2mm_PLA_MK3S_8h37m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €9.85 excluding VAT (range midpoint).
- Weight reported by the author
- 149 g
- Print time reported by the author
- 8.62 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Holds 13 of the Wide Mouth Ball Canning Rings in a simple tower
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 33
- Makes
- 2
- Views
- 383
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
Simple tower to store wide mouth rings; if you print without top and bottom layers and with a 2d honeycomb infill you get a nice pattern through the model as shown in the picture.
Note: the filet at the bottom of the tower needs finer resolution than the generally recommended 0.3mm layer height; I recommend slicing with adaptive at 50% or manually decreasing the layer height for the filet to closer to 0.15 or 0.1 for a nice finish.