1 / 9
Nocturne Compatible Board Game Organizer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Playable, vertical and sleeve friendly.
- Rating
- 4 / 5
- Likes
- 2
- Downloads
- 21
- Makes
- 0
- Views
- 74
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial
- PRINT TIME: 7 h (Bambu P1S/X1C)
- FILAMENT: 225 g
- LARGEST PIECE: 141 mm x 91 mm
Printing Instructions:
- Print one of each file as oriented, without supports.
- Make sure you have good adhesion for the small details on the lids.
- The lids are all designed to be printed flat side down, and are held on by tension. If you find them too tight or too loose you can reprint .1-.2 mm larger in the X and Y directions. Make sure to manually adjust the X and Y measurements and unlock scaling so it doesn’t scale the rest of the model. Be aware that it will slightly loosen over time, so err on the side of tight. Make sure your adhesion is good for best results.
________________________________________________________________________________________
Check out all my free designs here on Printables! If you want to support my work and all of the free designs I bring to the community consider buying something from my Etsy shop or my Printables Store.