1 / 3
Chevrolet Badge Telescopic Fidget
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Chevy logo fidget
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 24
- Makes
- 0
- Views
- 105
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial
You and a partner have been tasked with choosing and remaking a silhouette within an 18cm x 18cm space. You will have to make a series of offsets to complete the model, make sure to use your partner for feedback and for help.
Imported the logo and made a 18x18 containt box around it
The process of this design started by tracing the outline of the logo with the line tool
We made offsets that were 0.08 and 0.24 (and switched between each of them for each offset) until we count go any further. 
After making the offsets we started to make the extruded cuts for the lines. started from the outermost edge and then cutting the next line until we got to the middle
Finished the extrude cuts process.
After the extrude cuts process, all we had to do is to mirror.
Converted the solidworks file to a 3mf to import to OrcaSlicer. After importing it, we painted the sides with their respective colors and sliced it in order to get it to print on the 3D printers.
Design Changes/Improvements
The sides were too thin and flimsy on the original so we thickened the sides (mainly the outermost side.)