Santa Can Holder / Beer mug (two types)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two Can Holders for 0.5L Cans (12oz+330ml can inserts)
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 60
- Makes
- 0
- Views
- 145
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution
Santa Can Holder (two types)
Fits long EU cans with a capacity of 0.5L. You can also use my insert for 12oz or 330ml (slim) cans (link below)
Recommended print settings: PLA, 0.2mm layers, 2-3walls, 8%gyroid, Automatic Tree supports (at least 30°)
You can choose from two models, just be careful, the larger one will eat up a lot of material :)
#1 Small
#2 Big
Here is the link to my model of the insert that you can use in 0.5L holders with your 12oz , or 330ml slim cans, and 10mm riser if you want better access to the top. Both are scalable, so you can make them smaller or larger in your slicer.
https://www.printables.com/model/1322047-can-holder-riser-inserts-12oz-slim-330ml-scalable
Happy printing:)